Guitar Top
Showing 1–12 of 182 resultsSorted by latest

Burr Elm resin casting piece RCELM02
Burr Elm resin casting piece RCELM02
0.85kg piece of Live Edge Burr Elm. Please see photos for details and measurements, let me know if you have any questions
68.0mm / 2.6" Thick

Burr Elm resin casting piece RCELM01
Burr Elm resin casting piece - RCELM01
3kg piece of lovely Burr Elm. Please see photos for details and measurements, let me know if you have any questions
53.0mm / 2.1" Thick

Hosco Medium Fret Crowning File
Goldo Fret Crowning File
A fantastic double sided fret crowning / contouring file by Goldo. Used to reshape fret wire after levelling. Suitable for use on medium and wide sized frets. The longer than usual file and rounded end grant easy fret access no matter what model of guitar is being worked on. Solid Beech handle. This file a great addition to any Luthiers tool collection.
Specifications:
Make: Goldo
Model: WS039
Type: Fret Crowning / Contouring File
Total Length: 250mm
Handle Length: 100mm
Handle Material: Beech
File Type: Double Sided
Global Shipping available.

Goldo Fret Crowning File
Goldo Fret Crowning File
A fantastic double sided fret crowning / contouring file by Goldo. Used to reshape fret wire after levelling. Suitable for use on medium and wide sized frets. The longer than usual file and rounded end grant easy fret access no matter what model of guitar is being worked on. Solid Beech handle. This file a great addition to any Luthiers tool collection.
Specifications:
Make: Goldo
Model: WS039
Type: Fret Crowning / Contouring File
Total Length: 250mm
Handle Length: 100mm
Handle Material: Beech
File Type: Double Sided
Global Shipping available.

Fret Slotting Saw Blade 0.6mm Kerf
Fret Slotting Saw Blade 0.6mm Kerf
Finest quality TCT blade, specially designed for cutting fret slots. With a 30mm arbour it will fit most table saws / Cross-cut saws / Chop & Mitre saws (Please check the arbour size of your machine before ordering). These blades have been specially made for Luthiers, with the teeth ground down to 0.6mm leaving perfectly clean slots that are ready to accept the fret wire.
Specifications:
External diameter: 180mm
Kerf: 0.6mm
Arbour: 30mm
Body thickness: 1.2mm
No. of Teeth: 100
Please note, this blade is designed for cutting fret slots only. It is not designed for ripping or heavy cuts in wood, and mis-use of this product could cause damage to the blade and serious injury to the user. If you have any questions about the product then please get in touch prior to purchasing.
Global shipping available.

Mahogany Neck Blanks – 40″ long x 35mm Thick
Mahogany Neck Blanks - 40" long x 35mm Thick
Quarter Sawn, Prime grade. 40" long x 4" wide x 35mm thick - full details below.

Mahogany Neck Blanks – 40″ long x 40mm Thick
Mahogany Neck Blanks - 40" long x 50mm Thick
Quarter Sawn, Prime grade. 40" long x 4" wide x 2"+ thick - full details below.

Mahogany Neck Blanks – 35″ Long x 40mm Thick
Mahogany Neck Blanks - 35" Long x 40mm Thick
35" x 4" x 40mm thick, quarter sawn, prime grade.

Mahogany Neck Blanks – 30″ Long x 40mm Thick
Mahogany Neck Blanks - 30" Long x 40mm Thick
30" x 4" x 40mm thick, quarter sawn, prime grade.

Mahogany Neck Blanks – 35″ Long x 35mm Thick
Mahogany Neck Blanks - 35" Long x 35mm Thick
35" x 4" x 35mm thick, quarter sawn, prime grade.

Mahogany Neck Blanks – 40″ long x 50mm Thick
Mahogany Neck Blanks - 40" long x 50mm Thick
Quarter Sawn, Prime grade. 40" long x 4" wide x 2"+ thick - full details below.

Mahogany Neck Blanks – 35″ long x 50mm Thick
Mahogany Neck Blanks - 35" long x 50mm Thick
Quarter Sawn, Prime grade. 35" long x 4" wide x 2"+ thick - full details below.